UtilityBase logoUtilityBase

Calculators

Mbps to MB/s Converter

Convert megabits to megabytes per second — and every other speed unit — instantly.

Updated July 10, 2026

How to use the mbps to mb/s converter

  1. 1Enter a speed value.
  2. 2Choose its unit (Mbps, MB/s, Gbps, and more).
  3. 3Read the equivalent in every other unit.
  4. 4Check how long 1 GB takes at that speed.

Common uses

  • Translating an ISP's Mbps plan into real MB/s download speed
  • Understanding a download manager's MB/s readout
  • Comparing plans quoted in different units
  • Teaching the bits-versus-bytes distinction

Frequently asked questions

Why is 100 Mbps only 12.5 MB/s?

Because there are 8 bits in a byte. Internet speed is measured in megabits per second (Mbps), while file sizes and download managers use megabytes per second (MB/s). Dividing megabits by 8 gives megabytes, so 100 Mbps equals 12.5 MB/s. The lowercase b means bits; the uppercase B means bytes.

Are these decimal or binary units?

Decimal, matching how ISPs sell connections: 1 kbps is 1,000 bits per second, 1 Mbps is 1,000,000. Storage is sometimes measured in binary (1 KiB = 1,024 bytes), which is a separate convention. For internet speed the decimal definition is standard and is what this converter uses.

Why is my real download slower than the converted MB/s?

The conversion gives the theoretical maximum. Real transfers lose 10-20% to protocol overhead, server-side limits, Wi-Fi, and network congestion. The converted MB/s is the ceiling; expect actual speeds a bit below it, and much lower if a server is throttling or your Wi-Fi is weak.

About this tool

The Mbps to MB/s converter turns internet speeds between the units ISPs advertise (megabits per second) and the ones downloads show (megabytes per second), plus kbps, Gbps, KB/s, and GB/s. The one rule behind it all: a byte is 8 bits, so MB/s is Mbps divided by 8, which is why a 100 Mbps plan downloads at about 12.5 MB/s. Network units are decimal here (1 kb = 1,000 bits) to match how connections are sold. It also shows how long 1 GB takes at the chosen speed. Everything is computed in your browser.

Like most tools on UtilityBase, the mbps to mb/s converter runs entirely in your browser — nothing you enter is uploaded or stored on a server. It's free to use with no account required. Browse more calculators here.

Was this tool helpful?

Related tools